CARACTERISTICAS:

The Tannoy Di5 is an ultra compact surface mount weather resistant loudspeaker with a 130mm (4.50") ICT™ drive unit. Ideal for stereo or monaural background or foreground music systems in applications including theme parks, retail premises, restaurants and cafés, corporate audio visual, residential developments and houses of worship.

Weather resistant, rated IP64 to EN60529 (IEC529); the textured black or white painted finish, with matching rubber trims, of the outstandingly durable and scuff resistant, high impact polystyrene (HIPS) enclosure is fully optimised for consistent performance in adverse conditions indoors or out.

SYSTEM
Frequency Response (-3dB) (1) 90Hz - 25kHz
Frequency Range (-10dB) (1) 80Hz - 30kHz
System Sensitivity (1W @1m) (2) 88dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Driver Complement
High Frequency: ICT™
Low Frequency: 110mm (4.50”) mineral loaded polypropylene

Crossover 7kHz Inductively coupled
Directivity Factor (Q) 5.3 averaged 1kHz to 10kHz
Directivity Index (DI) 6.6 averaged 1kHz to 10kHz
Rated Maximum SPL Average: 105dB
Average: 103dB (30W tapping on transformer)
Peak: 111dB
Power Handling (3) Average: 50W
Programme: 100W
Peak: 200W
Recommended Amplifier Power 100W @ 6 Ohms
Nominal Impedance 6 Ohms
CONSTRUCTION
Enclosure High Impact Polystyrene (HIPS)
rated IP64 to EN60529 (IEC529)
Grille Steel, with weather resistant coating
Finish Textured black or white paint
(custom trim colours can be supplied pre-fitted to special order - minimum order quantity applies)
Connectors Euroblock type removable locking connector with screw terminals with "loop through" facility
Fittings 1 x K-Ball™ Bracket socket
2 x M8 yoke bracket inserts
Supplied
Accessories Yoke bracket
Optional
Accessories Pole mount adaptor
K-Ball™ pre-wired multi angle bracket
Dimensions 240.7 x 155 x 162mm
(9.47 x 6.1 x 6.38”)
NET Weight 2.7kg
(5.94lbs)